黄埔发电厂#6发电机转冷水系统改造

黄埔发电厂#6发电机转冷水铜离子含量超标，通过对缺陷原因进行分析，针对二级水封的特性对溢出的转冷水进行回收并利用化学凝结水处理去除溶出的铜离子，通过控制转冷水的pH值最终减缓铜管的腐蚀.     

Densitometry determination of dioxins using gold nanoparticlemodified dioxin response element probes

This study aims to develop a rapid and sensitive densitometry bioassay of dioxins. It is known that dioxin ligand can bind heterodimeric aryl hydrocarbon receptor (AhR) and trigger the formation of the complex of dioxin-AhR, AhR nuclear translocator (Arnt), and dioxin-responsive element (DRE). We have established a rapid and sensitive method using nanoparticle-modified DRE probes based on dioxin-dependent binding of DRE to AhR complex. Dioxins can trigger the binding of nanoparticle-modified DRE probe to AhR complex. The nanoparticle-modified DRE probes in the dioxin-AhR-Arnt-DRE complexes immobilized on the microplates were detected by measuring optical density after silver enhancement. Results showed that as little as 0.01 pM of TCDD could be detected. Dioxins could be quantified accurately with the linear range from 1 nM to 0.01 pM. The coefficient of variation was 5≈8% in this bioassay. The optical density of nanoparticle-based silver enhancement was produced in a dose- and time- dependent manner. The dioxin concentrations in fly ash samples determined by this bioassay were comparable with that by the standard HRGC/HRMS. Thus this bioassay is a sensitive and convenient cell-free bioassay of dioxin that is suitable for screening of dioxins in environmental or food matrices.     

New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

首钢京唐钢铁联合有限责任公司厂址选定及建厂条件介绍

介绍了首钢京唐钢铁联合有限责任公司的基本情况、厂址选定和建厂条件。该工程已列为国家“十一五”规划的重要项目。     

河流二维水质模型与地理信息系统的集成研究

根据水质预测、管理的不同需求,提出基于二维对流扩散方程的三种水质计算模式:连续点源排放水质模型,瞬时点源排放水质模型,有限体积法求解的数值解水质模型。基于MO进行GIS系统的组件式开发,实现了GIS平台下河势贴体河道二维正交网格的自动生成,解决了二维水体的空间网格离散问题。在此基础上,将三种类型的二维水质模型模块与GIS平台集成,以更好满足水质预测与管理在水质模型计算方式选取、计算精度与实现效率等方面的需求。     

徐深气田火山岩储层测井解释饱和度方法研究

徐深气田兴城地区深层火山岩储层岩性复杂、储层流体多变、属于特低孔隙度、特低渗透性储层。火山岩储层岩性对电阻率的影响超过储层流体对电阻率的影响,其岩电实验参数特征与砂岩储层存在着较大的差异,根据传统的阿尔奇公式难以准确求取储层的原始含气饱和度。下面以徐深气田兴城地区酸性火山岩岩电实验为例,探讨如何对传统阿尔奇公式加以改进,建立徐深气田兴城地区火山岩储层饱和度解释模型。经过多口井的实际应用,取得了较好的应用效果。     

基于图像处理的炮管轴线直线度检测方法

在分析国内外直线度检测现状和比较了直线度测量的激光准直法、圆度法、杠杆法优缺点的基础上,提出了一种基于图像处理的炮管轴线直线度检测激光反射法.该方法通过激光器发出激光,经准直后射向分光镜,部分反射后射向测量元件.测量元件在炮管内移动并感知炮管实际轴线位置的变化.激光经反射后透射过分光镜到光靶上,CCD摄像机摄得光靶上被测信息的图像.经过图像处理及数据处理得出对应被测截面图像中的激光束中心,按照角度积累的公式计算出轴线直线度误差.同时论述了在Win98和VC++6.0环境下软件实现的步骤.实验结果表明该方法具有灵敏度高、测量速度快,对被测对象尺寸要求较低,适合在工厂内使用等优点.     

用改进的逐次逼近解法计算二维井间电磁场

提出了一种计算积分方程的新方法——改进的逐次逼近解法 (MSAM) ,并用该方法计算了轴对称二维井间电磁场。与传统的逐次逼近解法 (SAM)相比 ,该方法收敛性强 ,应用范围广 ,可适用于高电导率对比地层。由于不必进行直接的大型矩阵求逆运算 ,因此与积分方程的直接解法 (IE)相比 ,该方法计算速度更快 ,所需内存更少。采用矩阵求逆方法计算了成层介质中的二维 Green函数 ,并对含 Green函数的积分进行了简化 ,从而加快了计算速度。数值计算结果显示 ,在地层电导率对比度达到 2个数量级时 MSAM仍收敛 ,且计算结果与直接求解积分方程的结果一致 ,因此 MSAM是一种有效的计算轴对称二维井间电磁场的方法     

NUMERICAL SIMULATION OF STRESS-INDUCED SECONDARY FLOWS WITH HYBRID FINITE ANALYTIC METHOD

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｔｕｒｂｕｌｅｎｔｓｔｒｕｃｔｕｒｅｓｉｎｎｏｎ ｃｉｒｃｕｌａｒｄｕｃｔｓａｎｄｏｐｅｎｃｈａｎｎｅｌｓａｒｅｃｈａｒａｃｔｅｒｉｚｅｄｂｙｌｏｎｇｉｔｕｄｉ ｎａｌｖｏｒｔｉｃｅｓ .Ｔｈｅｓｅｖｏｒｔｉｃｅｓａｒｅｔｈ